Settings reference / Manual positions
Manual positions settings
Your own positions: monitoring and alerts, Let Wallbot manage, auto-manage and the manual management style. 32 settings on this tab.
Generated from the code. Defaults, ranges, choices, units and the live confirmation rule on this page are read from the settings schema each time the docs are generated, so they always match the bot.
Summary
All settings
Monitor your manual positions
monitor_manual_positions
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Show positions and orders Wallbot did not create (no wb client id) on the dashboard (Trades, marked Manual; entry, liquidation, stop and take profit lines on both charts) and send the alerts below. Wallbot never places, changes or cancels anything for them, never trades the coin/side of one, and their margin counts in the free-balance check. Live and testnet; read from the periodic reconciliation.
What it does
Shows positions and orders Wallbot did not create (no wb client id) in Trades, marked Manual, with side, size, entry, leverage, margin, unrealized PnL, liquidation and your own stop/TP orders, and draws their entry, liquidation, stop and take-profit lines on both charts. Sends the manual alerts. Wallbot never places, changes or cancels anything for them, never trades the coin/side of a manual position, and their margin counts in the free-balance check. Updated by the periodic reconciliation (every reconcile_interval_s) and the live mark price.
Example
You open a 0.01 BTC long at 82,000 by hand: within 60 s it appears as "BTCUSDT Long · Manual" with entry 82,000, liquidation 70,000 and your stop 80,500.
When to change it
Keep on if you trade manually on the same account.
Higher, lower, on or off
On: shown and alerted. Off: not shown, no alerts (Wallbot still never touches them).
Risk notes
None: read only.
Manual: alert when there is no stop
manual_alert_no_stop
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: High-priority alert (at most every 10 minutes) and a dashboard warning while a manual position has no stop order of yours, after manual_no_stop_after_s.
What it does
High-priority alert, at most every 10 minutes, and a dashboard warning while a manual position has no stop order of yours (a stop or trailing stop on the closing side), after manual_no_stop_after_s.
Example
A short opened at 3,000 without a stop: after 60 s "NO STOP on your manual short ETHUSDT 0.5 @ 3000".
When to change it
Keep on.
Higher, lower, on or off
On: alert. Off: no alert.
Risk notes
High if off: an unprotected manual position goes unnoticed.
Manual: no-stop alert after
manual_no_stop_after_s
- Default
- 60 s
- Range
- 0 to 3600 s
- Type
- Number
- Unit
- s
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Time to place your stop after opening a position before the no-stop alert.
What it does
How long after a manual position first appears the no-stop alert waits, so you have time to place your stop.
Example
At 60 a position opened at 10:00:00 without a stop alerts at 10:01:00 at the earliest (the reconciliation runs every 60 s).
When to change it
Raise it if you usually set the stop a bit later.
Higher, lower, on or off
Higher: later alerts. Lower: sooner.
Risk notes
Low.
Manual: alert near liquidation
manual_alert_liq
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: High-priority alert (at most every 10 minutes) when the price is within manual_liq_alert_pct of a manual position's liquidation price.
What it does
High-priority alert, at most every 10 minutes per position, when the mark price is within manual_liq_alert_pct of a manual position's liquidation price (Binance's value).
Example
Long, liquidation 80,000, mark 81,500: 1.84% away, below the 2% default: "NEAR LIQUIDATION BTCUSDT long (manual)".
When to change it
Keep on.
Higher, lower, on or off
On: alert. Off: none.
Risk notes
High if off.
Manual: liquidation alert distance
manual_liq_alert_pct
- Default
- 2 %
- Range
- 0.1 to 50 %
- Type
- Number
- Unit
- %
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: manual_alert_liq: alert when the price is this close to liquidation.
What it does
manual_alert_liq: the distance from liquidation (as % of the price) at which the alert fires.
Example
At 2 a long with liquidation 80,000 alerts below a mark of about 81,630.
When to change it
Raise it for earlier warning on volatile coins.
Higher, lower, on or off
Higher: earlier alerts. Lower: later.
Risk notes
Low.
Manual: alert when a protecting wall goes
manual_alert_wall
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Alert when a confirmed support wall under a manual long (resistance over a short), within the wall range, is pulled or broken.
What it does
Alert when a confirmed wall that protects a manual position is pulled or broken: a support wall under a long (resistance over a short) between the price and wall_max_dist_pct away. At most every 5 minutes per wall.
Example
Manual long at 82,000, mark 82,300, support wall 81,900-81,950 (0.43% below) pulled: "WALL PULLED under manual BTCUSDT long".
When to change it
Keep on if you use walls for your manual trades.
Higher, lower, on or off
On: alert. Off: none.
Risk notes
Low.
Manual: PnL milestone alerts
manual_alert_pnl
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: One alert per milestone per position when its ROE (unrealized PnL / margin) reaches a value in manual_pnl_milestones.
What it does
One alert per milestone per position when its ROE (unrealized PnL / margin, Binance values) reaches a milestone in manual_pnl_milestones.
Example
Margin 10 USDT, unrealized +5.2 USDT = +52% ROE: "MANUAL BTCUSDT long +50% ROE" once.
When to change it
Turn off if you do not want these.
Higher, lower, on or off
On: milestone alerts. Off: none.
Risk notes
None.
Manual: PnL milestones
manual_pnl_milestones
- Default
- 50,100,-30
- Range
- Free text
- Type
- text
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: ROE % values, comma separated: positive ones fire when reached from below, negative ones when reached from above.
What it does
The ROE % values for manual_alert_pnl, comma separated. Positive values fire when reached from below, negative ones when reached from above; each fires once per position.
Example
"50,100,-30": +50% and +100% ROE, and -30% ROE.
When to change it
Add -50 for an earlier loss warning, 200 for big winners.
Higher, lower, on or off
More values: more alerts.
Risk notes
None.
Manual: alert when closed
manual_alert_closed
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: When a manual position disappears: an alert with Binance's realized PnL, fees and funding since Wallbot first saw it.
What it does
When a manual position disappears: an alert with Binance's realized PnL, fees and funding for the coin since Wallbot first saw the position (from the income history).
Example
"Your manual long BTCUSDT is closed. Binance: realized +12.3400 USDT, fees -0.4100, funding -0.0200, net +11.9100 USDT".
When to change it
Keep on.
Higher, lower, on or off
On: alert. Off: none.
Risk notes
None.
Let Wallbot manage button
manual_adopt_button
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Each manual position gets a 'Let Wallbot manage' button (confirmation; I ACCEPT in live). Wallbot first places its stop behind the nearest confirmed wall within range (never looser than your stop), then keeps or cancels your stop/TP orders as you choose, and manages it like its own trade. 'Hand back' ends that and leaves the current stop on the exchange. Automatic only with auto_adopt_manual.
What it does
A "Let Wallbot manage" button on each manual position. After a confirmation (I ACCEPT in live) that shows the proposed stop and your existing stop/TP orders, and your choice to keep or replace them: Wallbot places its own stop first (behind the nearest confirmed same-side wall within wall_max_dist_pct, stop_beyond_wall_pct behind it; never looser than your own stop; with no wall your stop, with neither max_loss_pct of margin from the price; refused if it would trigger at once or pass liquidation), then keeps or cancels your orders, then manages it like its own trade (protection, breakeven, trailing, take profit at the counter wall). Isolated positions only. "Hand back" ends management: Wallbot's take profit is cancelled, its current stop stays on the exchange. Automatic only with auto_adopt_manual; both are logged and notified.
Example
Manual long 0.01 @ 82,000, your stop 80,000, support wall 81,500-81,550: Wallbot's stop goes to 81,092 (0.5% behind the wall), tighter than 80,000, so it is used.
When to change it
Turn off to hide the button.
Higher, lower, on or off
On: the button is shown. Off: hidden; manual positions are only monitored.
Risk notes
Medium when used: Wallbot then moves the stop and may close the position.
Auto-manage new manual positions
auto_adopt_manual I ACCEPT in live
- Default
- Off
- Range
- On or off
- Type
- On/off
- Live confirmation
- Yes: switching it on in live mode asks you to type I ACCEPT.
In the dashboard: When a NEW position of yours appears (your order filled, no wb client id), Wallbot adopts it at once, like 'Let Wallbot manage' without the dialog, and notifies you. Positions already open when this is switched on stay manual; a handed-back position is never adopted again. Isolated positions only. Rules: auto_adopt_max_loss_pct, auto_adopt_cancel_looser_stop, auto_adopt_cancel_tp, auto_adopt_exclude; managed with the manual_* style.
What it does
When a new position of yours appears on Binance (your own order filled; its client id does not start with wb), Wallbot adopts it automatically, exactly like the "Let Wallbot manage" button but without the dialog, and sends a notification ("Auto-managing your manual long ZECUSDT ..."). Positions that were already open when you switched this on stay manual; a position you handed back is never adopted again; coins in auto_adopt_exclude are skipped. Only isolated positions: anything else gets a high-priority alert and stays manual. An adopted position is managed with the manual style (manual_trail_tiers, manual_breakeven_roe, manual_use_counter_wall_tp, manual_wall_exits) and follows your adds and partial closes (manual_resize_on_change).
Example
You open a 20x isolated long on ZECUSDT by hand at 40.00 with a stop at 38.00. Within about 10 s Wallbot places its stop behind the nearest confirmed support wall (say 39.50), cancels your looser stop at 38.00, and notifies you; from then on breakeven and trailing follow the manual style.
When to change it
Turn on when you want every manual trade protected and trailed without clicking the button. Check it on the Binance demo account first (testnet adopt / auto-adopt / hand-back check).
Higher, lower, on or off
Off (default): manual positions are only monitored. On: new manual positions are adopted automatically.
Risk notes
Medium: Wallbot then moves the stop of your positions and may close them. It never opens or adds to a position.
Auto-manage: keep my stop
auto_adopt_keep_my_stop I ACCEPT in live
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- Yes: switching it on in live mode asks you to type I ACCEPT.
In the dashboard: Auto-manage: if you have a stop, it stays the protective stop even when it is looser than Wallbot's would be (Wallbot does not cancel it); Wallbot only adds breakeven and trailing and tightens from there. Only with no stop of yours does Wallbot place one. Exception: a stop of yours that is not safely before liquidation is kept too, but Wallbot adds its own safe stop. Off: auto_adopt_cancel_looser_stop decides.
What it does
Automatic adoption, when you already have a stop: on, your stop stays the protective stop even if it is looser than the stop Wallbot would choose. Wallbot takes it over as the trade's stop (it does not cancel it) and only adds breakeven and trailing, tightening from your stop. Only if you have no stop does Wallbot place one. A stop of yours that is not safely before liquidation is kept as well, but Wallbot then adds its own safe stop. If your stop covers less than the whole position, Wallbot replaces it by one for the whole position at the same price. Closed by it: "stop (your stop)".
Example
Manual long 0.5 @ 141.54 with your stop at 141.10, Wallbot's wall stop would be 141.30: on = your 141.10 stays and becomes the managed stop (trailing later moves it up); off = auto_adopt_cancel_looser_stop decides (by default Wallbot's 141.30 is placed and yours cancelled).
When to change it
Keep on if your own stop reflects your plan for the trade.
Higher, lower, on or off
On (default): your stop is kept. Off: Wallbot may replace a looser stop.
Risk notes
Medium: a looser stop of yours means a larger possible loss.
Auto-manage: fallback stop by
auto_adopt_fallback_mode I ACCEPT in live
- Default
atr- Choices
atr,pct- Type
- Choice
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: Auto-manage, no stop of yours and no usable confirmed wall: atr = auto_adopt_atr_mult x ATR(14) of 15-minute candles from your entry; pct = auto_adopt_max_loss_pct of margin. Either way the loss is capped at auto_adopt_max_loss_pct and the stop is moved in to stay safely before liquidation; if no safe stop fits, the position is not adopted and you get a high-priority alert.
What it does
Automatic adoption with no stop of yours and no usable confirmed wall: how far away Wallbot's fallback stop goes. atr: auto_adopt_atr_mult x ATR(14) of 15-minute candles from your entry, so the room follows the coin's volatility. pct: auto_adopt_max_loss_pct of margin. Both are capped at auto_adopt_max_loss_pct and moved in to stay safely before liquidation (the same rule as Wallbot's own liquidation check); if no safe stop fits, the position is not adopted and you get a high-priority alert. If the candles cannot be read, pct is used. Closed by it: "stop (fallback)".
Example
20x long from 0.0620, ATR(14) 0.0009: atr = 2 x 0.0009 = 0.0018 below, stop 0.0602 (58% of margin, under the 60% cap); if that is past liquidation 0.0605, it moves in to about 0.0606.
When to change it
Use pct for a fixed loss per position, atr to give volatile coins more room and quiet coins less.
Higher, lower, on or off
atr (default): volatility-based distance. pct: a fixed share of margin.
Risk notes
Medium: either way the stop can sit close to liquidation at high leverage.
Manual: liquidation room alert (ATR)
manual_liq_room_atr_mult I ACCEPT in live
- Default
- 0.5
- Range
- 0 to 10
- Type
- Number
- Live confirmation
- Yes: lowering it in live mode asks you to type I ACCEPT.
In the dashboard: When a manual position is first seen or Wallbot takes it over, a high-priority alert if the distance from the price to liquidation is less than this many ATR(14) of 15-minute candles: a stop cannot reliably protect it. Alert only (the takeover places its safe stop as always). 0 = off.
What it does
When a manual position is first seen (auto-manage on or off) or when Wallbot takes it over, a high-priority alert if the distance from the current price to its liquidation price is less than this many ATR(14) of 15-minute candles: a normal swing can reach liquidation, so a stop cannot reliably protect it. Alert only: the takeover still places its safe stop. One alert per position (per entry price). 0 = off.
Example
0.5, UAI: liquidation 2.5% away, ATR 12.6%: alert "UAIUSDT: liquidation 2.5% away, normal swing (ATR) 12.6%: a stop can't reliably protect this; add margin or reduce size."
When to change it
Whenever you trade manually with high leverage on volatile coins.
Higher, lower, on or off
Higher: alerts on more positions.
Risk notes
None: alert only.
Auto-manage: ATR multiple
auto_adopt_atr_mult I ACCEPT in live
- Default
- 2
- Range
- 0.5 to 10
- Type
- Number
- Live confirmation
- Yes: raising it in live mode asks you to type I ACCEPT.
In the dashboard: auto_adopt_fallback_mode atr: the fallback stop sits this many ATR(14) of 15-minute candles from your entry.
What it does
auto_adopt_fallback_mode atr: how many ATR(14) of 15-minute candles the fallback stop sits from your entry (still capped by auto_adopt_max_loss_pct and moved in before liquidation).
Example
2.0 with ATR 0.85 on a 141.54 long: stop 139.84 (1.2% below; at 68x that is past liquidation, so it moves in to stay safely before it).
When to change it
Raise it to give positions more room, lower it for tighter protection.
Higher, lower, on or off
Higher: wider stop, larger loss when hit. Lower: tighter stop, stopped out more often.
Risk notes
Medium.
Auto-manage: maximum fallback loss
auto_adopt_max_loss_pct I ACCEPT in live
- Default
- 60 % of margin
- Range
- 5 to 90 % of margin
- Type
- Number
- Unit
- % of margin
- Live confirmation
- Yes: raising it in live mode asks you to type I ACCEPT.
In the dashboard: Auto-manage: the largest loss of margin a fallback stop may have (the ATR stop is capped here; in pct mode it is the distance). Measured from your entry (from the current price if the position is already past it). The stop is always moved in to stay safely before liquidation; if no safe stop fits, the position is not adopted and you get a high-priority alert.
What it does
Automatic adoption: the largest loss of margin a fallback stop (no stop of yours, no usable wall) may have. In atr mode it caps the ATR distance; in pct mode it is the distance. Measured from your entry (from the current price if the position is already past it). The stop is then moved in to stay safely before liquidation; if no safe stop fits, the position is not adopted and you get a high-priority alert.
Example
60 on a 20x long from 100.00: the fallback stop is at most 3% below (97.00); liquidation at about 97.50 is closer, so the stop moves in to just before it (about 97.60).
When to change it
Lower it to cap the loss per adopted position.
Higher, lower, on or off
Higher: fallback stops may be wider (up to liquidation). Lower: tighter caps.
Risk notes
Medium: a large value means a large loss before the stop.
Auto-manage: never these coins
auto_adopt_exclude
- Default
- (empty)
- Range
- Free text
- Type
- text
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Auto-manage: coins that are never adopted automatically, comma separated (e.g. BTCUSDT,ETHUSDT). They stay monitored; the button still works.
What it does
Coins that automatic adoption skips (comma separated). They are still monitored, and you can still adopt them with the button.
Example
BTCUSDT,ETHUSDT: a manual BTC long of 0.01 stays yours; a manual SOL long of 5 is adopted.
When to change it
For coins you always want to manage yourself.
Higher, lower, on or off
Empty (default): every coin can be adopted automatically.
Risk notes
None.
Auto-manage: replace a looser stop of yours
auto_adopt_cancel_looser_stop
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Auto-manage: your stop is kept if it is tighter than Wallbot's (Wallbot's stop then uses your price, never looser); a looser stop of yours is cancelled after Wallbot's stop is confirmed. Off: your stops are always kept.
What it does
Automatic adoption: what happens to your own stop. If your stop is tighter than the stop Wallbot would choose, it is kept (and Wallbot's stop uses your price, never looser). If yours is looser, Wallbot's stop is placed and confirmed first, then yours is cancelled.
Example
Long at 50.00, your stop 47.00, Wallbot's stop behind the wall 49.20: your stop is cancelled after Wallbot's 49.20 is confirmed. With your stop at 49.60 it stays and Wallbot's stop is placed at 49.60.
When to change it
Turn off to keep every stop of yours on the exchange as well.
Higher, lower, on or off
On (default): one effective stop. Off: your stops always stay.
Risk notes
Low.
Auto-manage: cancel your take profit
auto_adopt_cancel_tp
- Default
- Off
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Auto-manage: off = your take-profit orders stay as an extra exit; on = they are cancelled after Wallbot's stop is confirmed.
What it does
Automatic adoption: what happens to your take-profit orders.
Example
Your TP at 60.00 on a long from 50.00: off = it stays and can close the position; on = it is cancelled after Wallbot's stop is confirmed.
When to change it
Turn on if you want only Wallbot's exits.
Higher, lower, on or off
Off (default): your TP is an extra exit.
Risk notes
Low.
Managed manual: follow adds and partial closes
manual_resize_on_change
- Default
- On
- Range
- On or off
- Type
- On/off
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: A position adopted from you (button or auto) whose size changes because you added to it or closed part of it: Wallbot takes over the new size and entry price, resizes its stop (and an armed take profit) to the new size at the same price, and re-checks liquidation. Off: Wallbot's orders keep the old size.
What it does
A position adopted from you (by the button or automatically) changes size because you added to it or closed part of it. Wallbot takes over the new size and Binance's new entry price, moves its stop (and an armed take profit) to the new size at the same price (new order first, then the old one is cancelled), and re-checks liquidation.
Example
Adopted long 100 @ 2.00 with Wallbot's stop for 100 at 1.95; you buy 50 more at 2.10: Wallbot's stop becomes 150 at 1.95 and the entry 2.0333.
When to change it
Keep on; off leaves Wallbot's stop at the old size (part of the position unprotected after an add).
Higher, lower, on or off
On (default): stop and take profit follow your size. Off: they keep the old size.
Risk notes
Low.
Managed manual: take profit at the counter wall
manual_use_counter_wall_tp I ACCEPT in live
- Default
- Off
- Range
- On or off
- Type
- On/off
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: Positions adopted from you: off = no take profit, they run on stop, breakeven and trailing only (so a big move is not cut at the next wall); on = the same counter-wall take profit as Wallbot's own trades.
What it does
Positions adopted from you: whether Wallbot sets its take profit in front of the next confirmed counter wall, like its own trades.
Example
A manual long on a coin that pumps 300%: on = it is closed at the first resistance wall within 3% (a small gain); off = it runs on stop, breakeven and trailing.
When to change it
Turn on to treat adopted positions like Wallbot's own scalps.
Higher, lower, on or off
Off (default): no take profit for adopted positions.
Risk notes
Low to medium: off gives back part of a gain when a move reverses before the trailing stop is far enough up.
Managed manual: trailing tiers
manual_trail_tiers I ACCEPT in live used only with manual_trailing_mode inherit / keep_pct
- Default
- 100:30, 300:50, 1000:70
- Range
- Free text
- Type
- text
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: Positions adopted from you: trailing steps trigger_roe:keep_pct (keep % of the best ROE), independent of trail_tiers for Wallbot's own trades. Same rules as trail_tiers (the stop only tightens, never below breakeven + fees + slippage). Empty = the same trailing as Wallbot's own trades.
What it does
Trailing for positions adopted from you, as trigger_roe:keep_pct steps (keep that share of the best ROE once the best ROE reached the trigger). Independent of trail_tiers for Wallbot's own trades; always the keep_pct mode. The stop only tightens and never sits below breakeven + fees + slippage.
Example
"100:30, 300:50, 1000:70": from +100% ROE the stop locks 30% of the best ROE, from +300% 50%, from +1000% 70%. A 20x long reaching +500% (a 25% move) has its stop at +250%.
When to change it
Wide steps suit volatile coins and high leverage, where small ROE moves are noise.
Higher, lower, on or off
Empty: the same trailing as Wallbot's own trades.
Risk notes
Medium: wider steps give back more of a gain before the stop is hit.
Managed manual: breakeven from
manual_breakeven_roe I ACCEPT in live
- Default
- 100 % net ROE
- Range
- 0 to 10000 % net ROE
- Type
- Number
- Unit
- % net ROE
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: Positions adopted from you with no confirmed wall between price and stop: the stop moves to breakeven + fees + slippage only from this net ROE (Wallbot's own trades use min_net_roe_to_hold_unprotected). 0 = never.
What it does
Positions adopted from you with no confirmed wall between price and stop: the net ROE from which the stop moves to breakeven + fees + slippage. Wallbot's own trades use min_net_roe_to_hold_unprotected.
Example
100 on a 20x long: breakeven only after a 5% move; at 5 (Wallbot's own value) it would move after a 0.25% move, which volatile coins hit within seconds.
When to change it
Lower it to lock breakeven sooner.
Higher, lower, on or off
0: never moved to breakeven by this rule (trailing still floors at breakeven).
Risk notes
Medium: a high value keeps the original stop longer.
Managed manual: exit on wall events
manual_wall_exits I ACCEPT in live
- Default
- Off
- Range
- On or off
- Type
- On/off
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: Positions adopted from you: off = a pulled, faded or eaten wall never closes them at market and never starts trailing early (stop, breakeven and trailing only); on = the same wall rules as Wallbot's own trades.
What it does
Positions adopted from you: whether wall events (anchor wall pulled or faded, wall eaten after the fill, wall exhausted) may close them at market or start trailing early, as they do for Wallbot's own trades.
Example
Off: your adopted long from 50.00 keeps its stop at 49.20 when the support wall at 49.50 is pulled; on: it may be closed at market.
When to change it
Turn on only if you want adopted positions to follow the wall-bounce exits.
Higher, lower, on or off
Off (default): stop, breakeven and trailing only.
Risk notes
Low to medium: off means the stop, not the wall event, ends a failed position.
Managed manual: take profit
manual_tp_mode
- Default
inherit- Choices
inherit,counter_wall,fixed_profit_usdt,fixed_roe_pct,r_multiple,none- Type
- Choice
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: Take profit of auto-managed / Let-Wallbot-manage manual positions. inherit: the manual style (manual_use_counter_wall_tp: counter_wall when on, none when off). counter_wall, fixed_profit_usdt, fixed_roe_pct, r_multiple and none as for Wallbot's groups (r_multiple uses the planned loss at the stop set when it was adopted). Their trailing stays manual_trail_tiers; their size is yours.
What it does
The take profit of manual positions Wallbot manages for you (Let Wallbot manage or auto-manage). Their size is yours (no sizing override) and their trailing stays manual_trail_tiers.
Example
manual_tp_mode fixed_roe_pct, value 50: an adopted long with 20 USDT margin takes profit where it is up 10 USDT net after fees.
When to change it
To give your managed positions a fixed target instead of the counter wall.
Higher, lower, on or off
inherit: the manual style, manual_use_counter_wall_tp (counter_wall when on, none when off). counter_wall: in front of the nearest confirmed counter wall, as today. fixed_profit_usdt: at the price where the net profit after the entry and take-profit fees reaches the value in USDT. fixed_roe_pct: where the net ROE on margin after fees reaches the value in %. r_multiple: where the net profit reaches the value times the planned loss at the stop (R, fees and slippage included). none: no take profit, stop and trailing stop only. For r_multiple, R is the planned loss at the stop set when the position was adopted.
Risk notes
Low to medium: it only decides where profits are taken.
Managed manual: take-profit value
manual_tp_value
- Default
- 0 USDT, % or R
- Range
- 0 to 1e+06 USDT, % or R
- Type
- Number
- Unit
- USDT, % or R
- Live confirmation
- No. Changes apply in every mode without the typed confirmation.
In the dashboard: The value for a fixed managed-manual take profit: USDT, % ROE or R.
What it does
The number for a fixed manual_tp_mode: USDT, % ROE or R.
Example
fixed_profit_usdt 3: the take profit sits where the position is up 3 USDT net after fees.
When to change it
Together with manual_tp_mode.
Higher, lower, on or off
Higher: farther take profit. Lower: closer.
Risk notes
Low to medium.
Managed manual: trailing mode
manual_trailing_mode I ACCEPT in live
- Default
inherit- Choices
inherit,fixed_gap,keep_pct,price_gap- Type
- Choice
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: Trailing mode of Managed manual trades. inherit: today's rule (manual_trail_tiers when set, in the keep_pct style, else the global trailing). keep_pct: keep tiers (manual_trail_tiers; empty = the global trail_tiers or trail_keep_pct). fixed_gap: manual_trail_gap_tiers, else manual_trail_gap_roe from trail_activate_roe. price_gap: manual_trail_gap_price_pct, manual_trail_gap_atr_mult and manual_trail_gap_price_tiers. Same rules as the global modes.
What it does
The trailing mode of Managed manual trades, with that mode's own fields. inherit keeps today's rule: manual_trail_tiers when set (keep_pct style), else the global trailing (trailing_mode). keep_pct: keep a share of the best ROE (manual_trail_tiers; empty = the global trail_tiers / trail_keep_pct). fixed_gap: stay ROE points behind the best ROE (manual_trail_gap_tiers, else manual_trail_gap_roe from trail_activate_roe). price_gap: stay a % of the price, or a multiple of the 1-hour ATR, behind the best price (manual_trail_gap_price_pct, manual_trail_gap_atr_mult, manual_trail_gap_price_tiers), switched on only once that stop is at or beyond breakeven + fees + slippage. Every mode only tightens, moves in trail_step_roe steps, never locks below breakeven after fees and slippage, and works with Start trailing and wall-exhaustion protection.
Example
manual_trailing_mode fixed_gap with manual_trail_gap_tiers "100:50, 300:100": a Managed manual trade at best +350% ROE has its stop at +250%; price_gap 2.5% at 50x: a long that peaked at 106.00 has its stop at 103.35.
When to change it
To trail Managed manual trades differently from the others (the dashboard then shows only that mode's fields for the group).
Higher, lower, on or off
inherit: unchanged. keep_pct, fixed_gap, price_gap: that mode for this group only; the trade card, notifications and the close report name the group, the mode and the active tier.
Risk notes
Medium: the trailing decides how much profit a winner gives back. In live mode any change needs I ACCEPT; open trades switch to the new rule at their next price update (the stop never loosens).
Managed manual: trailing distance
manual_trail_gap_roe I ACCEPT in live used only with manual_trailing_mode fixed_gap
- Default
- 50 % ROE
- Range
- 1 to 500 % ROE
- Type
- Number
- Unit
- % ROE
- Live confirmation
- Yes: raising it in live mode asks you to type I ACCEPT.
In the dashboard: fixed_gap for Managed manual trades (when manual_trail_gap_tiers is empty): ROE points the stop stays behind the best ROE, from trail_activate_roe. Must stay below trail_activate_roe.
What it does
fixed_gap for Managed manual trades without distance tiers: the stop stays this many ROE points behind the best ROE, from trail_activate_roe. Must stay below trail_activate_roe.
Example
At 50: a trade that reaches +200% ROE has its stop at +150%.
When to change it
With manual_trailing_mode fixed_gap.
Higher, lower, on or off
Higher: more room, more profit given back. Lower: tighter.
Risk notes
Low to medium; a wider distance needs I ACCEPT in live mode.
Managed manual: trailing distance tiers
manual_trail_gap_tiers I ACCEPT in live used only with manual_trailing_mode fixed_gap
- Default
- (empty)
- Range
- Free text
- Type
- text
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: fixed_gap for Managed manual trades: trigger_roe:gap_roe steps like trail_gap_tiers ("100:50, 300:100"). Empty = manual_trail_gap_roe.
What it does
fixed_gap distance tiers for Managed manual trades, trigger_roe:gap_roe like trail_gap_tiers. Empty: manual_trail_gap_roe.
Example
"100:50, 300:100, 1000:200": best +250% -> stop +200%; best +400% -> +300%; best +1200% -> +1000%.
When to change it
With manual_trailing_mode fixed_gap, to give big winners more room.
Higher, lower, on or off
Set: the tier follows the best ROE; the stop only tightens. Empty: one distance.
Risk notes
Medium: wider gaps give back more on a reversal. Any change needs I ACCEPT in live mode.
Managed manual: price-gap distance
manual_trail_gap_price_pct I ACCEPT in live used only with manual_trailing_mode price_gap
- Default
- 2.5 % of price
- Range
- 0.1 to 50 % of price
- Type
- Number
- Unit
- % of price
- Live confirmation
- Yes: raising it in live mode asks you to type I ACCEPT.
In the dashboard: price_gap for Managed manual trades: the stop stays this % of the price behind the best price (like trail_gap_price_pct).
What it does
price_gap for Managed manual trades: the stop stays this % of the price behind the best price.
Example
2.5: a short that bottomed at 94.00 has its stop at 96.35.
When to change it
With manual_trailing_mode price_gap.
Higher, lower, on or off
Higher: more room, switches on later (the stop must first reach breakeven + fees). Lower: tighter, switches on sooner.
Risk notes
Medium: at high leverage 2.5% of the price is a large ROE distance (125% at 50x).
Managed manual: price-gap ATR multiple
manual_trail_gap_atr_mult I ACCEPT in live used only with manual_trailing_mode price_gap
- Default
- 0 x ATR(1h)
- Range
- 0 to 20 x ATR(1h)
- Type
- Number
- Unit
- x ATR(1h)
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: price_gap for Managed manual trades: 0 = off; set = this many x ATR(1h) (like trail_gap_atr_mult).
What it does
price_gap for Managed manual trades: 0 = off; set = the distance is this many times the ATR(14) of 1-hour candles, replacing manual_trail_gap_price_pct and the distance tiers.
Example
2 with an ATR(1h) of 0.80: a long that peaked at 106.00 has its stop at 104.40.
When to change it
With manual_trailing_mode price_gap, to follow each coin's volatility.
Higher, lower, on or off
Higher: wider. 0: the % distance or the tiers apply.
Risk notes
Medium: the distance changes with volatility; the stop still never loosens.
Managed manual: price-gap distance tiers
manual_trail_gap_price_tiers I ACCEPT in live used only with manual_trailing_mode price_gap
- Default
- (empty)
- Range
- Free text
- Type
- text
- Live confirmation
- Yes: any change in live mode asks you to type I ACCEPT.
In the dashboard: price_gap for Managed manual trades: trigger_roe:distance_pct steps like trail_gap_price_tiers. Empty = manual_trail_gap_price_pct.
What it does
price_gap distance tiers for Managed manual trades, trigger_roe:distance_pct like trail_gap_price_tiers. Empty: manual_trail_gap_price_pct.
Example
"0:2.5, 1000:4": 2.5% behind the best price, 4% once the best ROE reached +1000%.
When to change it
With manual_trailing_mode price_gap and no ATR multiple.
Higher, lower, on or off
Set: the distance follows the best ROE; the stop only tightens.
Risk notes
Medium. Any change needs I ACCEPT in live mode.